Honeywell 138889A Contact Board Assembly
List Price: $9,999.99 Sale Price: $9,999.99
This component is OBSOLETE AND ONLY AVAILABLE WHILE SUPPLIES LAST. Honeywell 138889A Contact Board Assembly for F50E & F59A. This item is located inside the air cleaner cabinet and makes contact with the top of the collector cells. There are 2 of these in most air cleaners.
NOTE: Obsolete and no longer available.
- 3 1/2 (inches)
- 6 7/8 (inches)
- 3 (oz)
138889A Contact board assembly by Frank (Springfield VA )
Board quality is excellent. However, the system design is poor due to limited access. To remove the old boards you have to reach in and disconnect two of the attached wires while jockying the foundation the boards are attached to. After bending the tabs back that secure the boards to the foundation plate and installing the new boards it gets interesting. You have to reattach the two wires that go to the control box then jocky the assembly back in place. The metal foundation has two tabs at the far end that must be inserted into slots at the back end of the filter housing. Then two screws at the front of the filter housing secure the entire peice in place. Wella!!! This should take no more than 20 minutes. You need a drop light, phillips screw driver, pliers and some patience.
contact bd assy by Jacob Philpot (louisville Ky US)
Easy to replace contact boards ,hard to figure how to get old contact boards out of furnace.